Motorola D201 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D201. Motorola D201 28 halaman. D200 series digital cordless phone
Juga untuk Motorola D201: Lembar Spesifikasi (2 halaman)

Halaman Cetak
Motorola D201 Panduan Pengguna
Allegro_CID.book Page 16 Tuesday, January 15, 2008 3:07 PM
Always keep a record of your base PIN code. Note your PIN code
and keep it in a safe place. If you change the PIN code you will
need to use the new code for any handset registered to your base.
1. Press
to access the main menu.
to select "BS SETTINGS" and press
2. Press
or
to select "MODIFY PIN" and press
3. Press
or
4. Enter the current PIN code using the number keypad
.
5. "NEW PIN" appears. Enter a new PIN code and press
6. "CONFIRM ?" appears. Re enter new PIN code. Press

Selecting a base

You can register a handset to up to 4 bases, e.g. one at work
and one at home, and switch between them. Once your
handset is registered with other bases, you can specify the
base you want to use.
1. Press
to access the main menu.
to select "HS SETTINGS". Press
2. Press
or
to select "SELECT BASE". Press
3. Press
or
4. Press
or
to select the base number.
Press
.

Resetting your phone

If you reset your phone, both the base and handset will return
to their pre-set (default) settings. If you have more than one
handset registered to your base and you complete the
following procedure, only the handset you reset and the base
will go back to the default settings.
16
For the base:
1. Press
to access the main menu.
2. Press
or
3. Press
or
.
4. "PIN ?" appears. Enter your PIN code. Press
.
The base will reset and the handset will return to standby
mode.
For the handset:
.
1. Press
to access the main menu.
.
2. Press
or
3. Press
or
4. "PIN ?" appears. Enter your PIN code. Press
The handset will reset and the handset will beep.

10. Default settings

.
Ringer Volume
Earpiece Volume
.
Speaker Volume
Base Ringer Type
Internal/External
Ringer Type
Alarm
Tone
to select "BS SETTINGS" and press
to select "BS DEFAULT" and press
.
to select "HS SETTINGS" and press
to select "HS DEFAULT" and press
.
2
3
3
1
1
OFF
Key Tone
ON
Battery Low
ON
Range Alarm
ON
.
.
.
.