Motorola D210 series Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel Motorola D210 series. Motorola D210 series 32 halaman. Digital cordless phone
Juga untuk Motorola D210 series: Lembar Spesifikasi (2 halaman)

Motorola D210 series Panduan Pengguna
Allegro_CID TAD.book Page 21 Tuesday, January 15, 2008 4:30 PM
On the handset you want to register:
5. Press
.
6. "PIN ?" appears. Enter the base PIN code. The pre-set base
PIN code is 0000.
7. Press
.
You will hear a confirmation tone when registration is
complete.
When in standby mode, the new handset number will be
displayed.
The handset will automatically be allocated with the next
available handset number.
If the registration fails, the handset display returns to the
display of before the registration.

De-register a handset

If you have more than one handset registered to your base,
you can de-register a handset.
Before de-registering, make sure all handsets and the base are
in standby mode.
1. On a handset not to be de-registered, press
access the main menu.
until "BS SETTINGS" is displayed and press
2. Press
or
.
to display "TERMINATE HS" and press
3. Press
or
4. "PIN ?" is displayed. Enter your PIN code and press
5. Press
or
to display the handset you want to de-register
and press
.
If the handset has been de-registered from the base
successfully, you will hear a confirmation tone.

Base PIN code

You need to enter the base PIN code when you are registering
handsets. For security reasons you may wish to change the
PIN code. You can choose a PIN code up to 4 digits long. If you
reset the base from the handset, the base PIN code will be
0000.
Always keep a record of your base PIN code. Note your PIN
code and keep it in a safe place. If you change the PIN code you
will need to use the new code for any handset registered to
your base.
1. Press
to access the main menu.
to select "BS SETTINGS" and press
2. Press
or
to select "MODIFY PIN" and press
3. Press
or
4. Enter the current PIN code using the number keypad and
press
.
5. "NEW PIN" appears. Enter a new PIN code and press
to
6. "CONFIRM" appears. Re enter a new PIN code. Press

Selecting a base

You can register a handset to up to 4 bases, e.g. one at work
and one at home, and switch between them. Once your
.
handset is registered with other bases, you can specify the
base you want to use.
.
1. Press
to access the main menu.
to select "HS SETTINGS". Press
2. Press
or
to select "SELECT BASE". Press
3. Press
or
.
.
.
.
.
21
.