Motorola GM1200E Panduan Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Radio Motorola GM1200E. Motorola GM1200E 36 halaman. Dealer programming software dps
Juga untuk Motorola GM1200E: Panduan Pengguna (22 halaman), Panduan Instalasi (8 halaman)

Halaman Cetak

To ﬁt the remote back housing:

Connect the ﬂex to the control head back housing PCB (i.e. original PCB inside control head).

Press the control head onto the remote back housing until it snaps into place.

Remote Front Housing

Front housing PCB

Pad

Remote mount

Radio front housing

Gasket

Remote cable

To install the remote control head into the vehicle:

Position the remote mount bracket in the desired location and mark the positions of the

mounting holes, centrepunch the marked spots and drill a 4 mm Ø hole at each mark. Mount

the trunnion with the supplied screws.

Ensure the socket gaskets are in the back of control head and radio front housing and

connect the remote mount cable to both connectors.

Snap the control head into the mounting trunnion and ﬁx it with the wing screws.

For more information on the remote mount kit please refer to the accessory chapter in the

Basic Service Manual (section 5 of the Product Manual).

Radio Installation

Remote

mount

radio

Flex connector

interface

Controlhead

Figure 1-9 Control Head Remote Mount Kit.

Gasket for

Remote cable socket

Remote Controlhead

back housing

Controlhead

Radio Mounting

Bracket

Remote mount

Gasket

Controlhead

PCB

Remote Back Housing

1-11