Motorola GM950 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Motorola GM950. Motorola GM950 11 halaman. Remote mount kit
Juga untuk Motorola GM950: Panduan Pengguna (9 halaman), Manual (16 halaman), Manual (18 halaman), Manual (18 halaman), Panduan Instalasi (10 halaman)

Halaman Cetak

Call Set Up

Radio On/Off

To switch the radio on, press and release the ON/

OFF switch. The radio performs a self-test and a

high-pitched start-up tone will be heard.

When the self test is complete the radio will show

the General Display:

1 2 3 4 5

1 2 3 4 5 6 7

If the error tone sounds, please contact the person

in charge of your radio system or your local

Motorola dealer.

To switch the radio off, press and hold the ON/OFF

switch for 2 seconds, then release.

Call Set Up

Channel Selection

You must be in General Display to select a channel.

Use the up/down scroll buttons (8) to display the

desired channel number next to the channel

icon

. The channel may be used as soon as it is

displayed.

Radio On-Off/Channel Selection/Address Selection

English

6 7

1 2 8

Address Selection

You can vary up to 7 digits to select the address of

another radio, using the keypad numeric buttons

(11) to select the desired digits.

When in General Display, pressing any numeric key

(0-9) displays the Edit Mode, the

together with the separator symbol and the

pressed numeric digit.

Entry is complete when the expected number of

digits is entered. Hyphens are displayed at the

empty positions where digits are expected to be

entered. If you attempt to enter too many digits, an

error tone will sound. The

enter the group call digit.

1 2 3 4 5 6 7

If a wrong digit is entered, momentarily press the

Clear button (9) and enter the correct digit. On

completion, press the

call button to set up the call. (See below - Sending

a Selective Call).

Your radio may be programmed to exit the Edit

Mode automatically, or you may manually exit by

pressing the Clear button for longer than 2

seconds.

icon is shown

button may be used to

button or a programmed