Motorola MaxTrac 300 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Motorola MaxTrac 300. Motorola MaxTrac 300 10 halaman. 6-frequency conventional fm radio
Juga untuk Motorola MaxTrac 300: Panduan Petunjuk Pengoperasian (37 halaman), Petunjuk Pengoperasian (2 halaman)

Halaman Cetak

The operator can also use a regular mic hook as long as it's metal (conductive), it should

work. If the mic is not "on hook" and the scan button is pressed, the display will flash

between the current channel and the scan mode. Ross, WØRCT, leaves the hanger clip on

the mic all the time and simply lays the mic down. An alternative way which may be

simpler, depending the microphone, is to "ground" the metal ring sticking out of the back

of the mic. How this is accomplished, is up to the operator.

Making a wire hook contact connector

By using a piece of wire, inserted into the notch, it still allows the use of the mic holder.

In the above case, the contact wire is not soldered. This was my first attempt. Later I

soldered it, inserted it firmly into the notch and it held without falling out. This is shown

below.