Motorola Pro3100 Panduan Pengguna - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Motorola Pro3100. Motorola Pro3100 29 halaman.
Halaman Cetak
Sending a Call
1. Turn radio on and select appropriate channel.
2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
3. Release PTT to listen.
Receiving a Call
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches
(2.5 to 5 cm) from your mouth, and speak clearly into it.
Deleting a Nuisance Channel During Scanning
1. While radio is on a nuisance channel, hold down preprogrammed Scan button
until you hear a tone.
2. Release Scan button.
Making a Phone Call
1. Press Phone button.
2. If access code is not heard, send access code if required.
3. Send phone number in one of the following ways:
• Press and release PTT to send last dialed number.
— or —
• when using enhanced keypad microphone only, press preprogrammed
Speed Dial button, followed by a keypad key (1–8), to access first nine
numbers in your phone list. (Press PTT if buffered dial.)
— or —
• when using enhanced keypad microphone only, enter phone number using
the keypad. (Press PTT if buffered dial.)
4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
Ending a Phone Call
1. Send deaccess code if required.
2. Press preprogrammed Phone button.
PRO3100
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see page 4 of this User Guide.
Red/Yellow/Green
LED Indicators
On/Off/Volume
Knob
Programmable
Button 1 (P1)
Microphone
Jack
(Interchangeable)
Button
Function
Short Press
™
Quick Reference Card
Channel Indicators (4)
Programmable
Button 2 (P2)
Channel Selector
(Interchangeable)
Buttons (1, 2, 3 & 4)
Long Press
Hold Down
Page