Motorola Radius CM300 Panduan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Radio Motorola Radius CM300. Motorola Radius CM300 36 halaman. Commercial series

Chapter 5

Installation Options

5.1

5.1.1

1. Open the radio cut-out in the dashboard to ISO 7736 specification (182mm x 53mm).

2. Insert the mounting frame into the dashboard cut-out and retain it by bending back the tabs (using

all 6 where possible). Check that the orientation of the frame is correct by ensuring that the word

"TOP" is facing upward.

NOTE 1. The tabs are easily bent back by twisting a large flat-bladed screwdriver in the slot

behind the tabs.

2. For a more secure installation, the mounting frame should also be secured with a

minimum of one screw.

3. The demounting tool can be used as an aid to mounting as well as demounting.

5.1.2

1. Make the necessary connections to the radio for power, antenna, and accessory connector as

shown in Figure 4-1.

2. Plug in all the connectors and push the radio firmly into the mounting frame until the two springs

snap into place.

Figure 5-1. Fitting the Radio into the Frame

Demounting Tool

Fix screws here to

secure frame

DIN Mount

FTN6083