Epson LABELWORKS LW-1000P Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembuat label Epson LABELWORKS LW-1000P. Epson LABELWORKS LW-1000P 2 halaman. All-rounded, quality label printing solutions on the go
Juga untuk Epson LABELWORKS LW-1000P: Brosur & Spesifikasi (4 halaman), Panduan Instalasi (2 halaman)

Halaman Cetak

Using the Printer

Printer Setup

1. Connecting the power

2. Inserting the tape cartridge in the printer

cable

CAUTION

Always perform the tape feed operation

Always use the AC adapter

after inserting a tape cartridge in the

provided.

printer.

Connect the AC adapter

Remove any slack in the tape inside the

provided (AST1527Z1-1) to the

tape cartridge.

printer, and plug the power plug

into a power outlet.

Press the

Auto power-off

The printer's power turns off

automatically when the printer has not

been used for about 8 hours.

USB Cable Connection to Computer

Install the printer driver after installing the Label Editor software.

1. Installing the "Label Editor" software in the computer

Insert the DVD-ROM provided in the DVD-ROM

drive of the computer to be connected.

1. Select the

language to use.

2. Click

1. Click

2. Installing the printer driver

1. Select

2. Click

1. Select

2. Click

Creating a Label

1. Creating a label

Use the label editing software "Label Editor" to

create labels.

See the Label Editor User's Guide for the detailed

Backing paper

procedures.

s Label Editor User's Guide

MEMO

Epson has a variety of custom tapes available for

many different applications.

For more information, see the Supplies Catalog

provided with the printer. s Supplies Catalog

2. Printing a label

Printing operations are done from the computer

connected to the printer.

See the Label Editor User's Guide for the detailed

procedures.

s Label Editor User's Guide

This section describes all the procedures from printer setup to printing and attaching a label.

The descriptions of computer connection and other procedures are for Windows.

If using the Mac OS X operating system, refer to the "Label Editor Lite for Macintosh User's Guide."

Place a tape cartridge in the printer as

shown.

Pass the end of the tape

through the gap.

Use a pen or

a pencil.

Close the top cover.

button to open the top cover.

Perform the tape feed operation.

1) Press the

button to turn the printer

power ON.

2) Press the

button.

The "License Agreement" screen appears. Read the

information, then click "Agree".

1. Select

2. Click

Perform the operations described in the on-screen

instructions.

When the installation completion message

appears, click "Finish".

Application software installation is now completed.

Next, install the printer driver. Go to Procedure

1. Turn the printer power ON.

2. Connect the computer and printer with the USB

cable.

3. Click

When the installation completion screen appears,

click "Finish".

The setup procedure is now completed.

Start the Label Editor software to create a label.

3. Attaching a label

Peel off the backing

Attach the label and rub it

paper.

firmly.

MEMO

If you set the tape cutting method to "Half cut", only the label

surface is cut when several labels are printed consecutively,

making it easier to peel off the labels.

See the Label Editor User's Guide for the detailed procedures.

s Label Editor User's Guide

Cutting rounded label corners

You can use the auto-trimmer to

round off label corners.

Insert the tape in the tape

insertion slot, following the

guide.

The tape is cut to form rounded

label corners.

Determining the computer connection method

The printer supports wireless LAN connection, wired LAN connection and USB

cable connection.

The connection method will vary according to the environment it is installed in.

Use the flowchart below to carry out the connection procedure.

Start

Can the computer to be connected to the printer be

connected to the Internet?

Does the computer have a wireless LAN function?

Yes

Connect the

Connect the printer on a

printer with a USB

Wireless LAN (Simple AP

cable.

Mode).

s Network Configuration

Guide "Setting up a wireless

LAN connection (Simple AP

Mode)"

Wireless LAN Connection to Computer

Install the software after making the printer and access point network settings.

1. Specifying the network connection method

MEMO

The procedure given here applies when making

the printer's network settings for the first time.

If you have already made the network settings,

see the Network Configuration Guide.

Insert the DVD-ROM provided in the DVD-ROM

drive of the computer to be connected.

1. Select the

language to use.

2. Click

1. Click

2. Printer and access point operations

1. Turn the printer power ON as directed in

the on-screen instructions.

2. Press the

button until the

lamp

flashes.

Press the printer's

button as directed

in the on-screen instructions.

Next, install the software in the computer.

Go to Procedure

Troubleshooting

This section describes how to resolve printer operation and label printing problems.

See the Network Configuration Guide for how to deal with network settings or

connection problems.

Printer's

button does not light.

Check that the power cable is properly connected. If the

not light, contact your place of purchase or the Epson customer support

center.

Printer does not print when print operation is directed.

• If a message is displayed on your computer screen, check the message

information.

• Check that connection cables are connected properly, that the tape

cartridge is mounted properly, and that the cover is closed properly.

• Have you selected the printer to be used? Printing will not be done

properly if another printer is selected.

• Did you restart the computer after installing the printer driver? The printer

driver may not be installed correctly if the computer was not restarted.

Reinstall the printer driver.

Text is not printed properly.

• Check that the tape cartridge is properly mounted.

• Print at a low speed. Change the setting in the printer settings of the

printer driver.

CAUTION

Do not connect connection cables to the printer until you are instructed to do so.

MEMO

Wireless LAN connection, wired LAN connection and USB

connection can be used at the same time in any combination.

Yes

Is there a broadband router or access point, and is a wireless LAN

function supported?

If a LAN cable is connected to the computer, a wired LAN

connection can be used.

s Network Configuration Guide "Configuring

settings for a wired LAN connection"

Yes

Connect the printer on a Wireless

LAN (Infrastructure Mode).

Does the access point have a WPS

button?

Yes

Use the push button auto-

connection function to set the

connection.

The "License Agreement" screen appears. Read

the information, then click "Agree".

1. Select

2. Click

Install the Network Configuration Tool if needed.

1. Select

10.

2. Click

1. Select

Next, make the printer and access point

2. Click

settings. Go to Procedure

3. Software installation

Press the WPS button for the access point as

directed in the on-screen instructions.

The settings have been made when the printer's

lamp stops flashing and lights steadily. The

settings information is saved in the printer.

The setup procedure is now completed.

Start the Label Editor software to create a

label.

Lines appear on printed labels.

The print head is dirty. Clean the print head.

Canceling a print job

Check the printer's power in ON, then press the

the printer briefly once.

Labels are not cut automatically

button still does

• Check if the cut setting is set to "Don't cut" in the printer settings of the

Label Editor software. s Label Editor User's Guide

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Half cut function doesn't work properly.

• Is the printer set to "Half cut" or "Don't cut"? Check the settings.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Trimmer doesn't cut properly.

• Is the printer printing? The trimmer doesn't operate during printing.

• Was the label inserted properly in the trimmer tape insertion slot? Insert

the label into the slot following the guide.

• Is the printer clogged with tape scraps? Remove the trimmer cover, and

remove the tape scraps.

• Are you using 6 millimeter-wide tape? You cannot cut 6 millimeter-wide

tape with the trimmer.

• Is the cutter blade worn? Prolonged use of the cutter can wear down and

blunt the blade. Contact the Epson customer support center.

Use one of the following methods

to set the connection:

• Use a PIN code to set the connection

• Set the connection manually

s Network Configuration Guide

"Wireless LAN settings using a

PIN code (when automatically

acquiring the IP address from the

printer)", "Setting the IP address for

the printer manually"

1. Select

2. Click

1. Select

2. Click

1. Select

2. Click

1. Click

2. Click

1. Select

2. Click

When the installation completion screen

appears, click "Finish".

button on the front of