Motorola CLP series Referensi Cepat

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Radio Portabel Motorola CLP series. Motorola CLP series 2 halaman. By wsi
Juga untuk Motorola CLP series: Panduan Referensi Cepat (2 halaman), Referensi Cepat (35 halaman), Panduan Pemecahan Masalah (2 halaman), Panduan Pengguna (48 halaman)

QUICK REFERENCE

CLP SERIES™ PORTABLE RADIO

Power/Battery

Button

Volume

Control (+/-)

Congratulations on your new radio!

Your radio is ready to use after a fully-charged battery has been installed and it is connected to an appropriate audio accessory.

Please refer to

www.motorola.com

CLP Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications

Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.

http://www.fcc.gov

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful

interference.

GETTING STARTED

1. INSTALL THE BATTERY

•

Push up the latch at the bottom of the battery door and lift the battery door off the radio.

•

Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the

battery down to secure in place.

•

Put the battery door back on the radio. Push down the latch to lock.

2. CHARGE THE BATTERY

Connect the power supply to the drop-in charging tray or multi-unit charger and insert the radio into the tray. The light on the

charger is red when the radio is charging. It turns to green once the radio is fully charged.

Accessory

Connector

for information on approved accessories.

Menu Button

Smart Status

Glow

Push-to-Talk

(PTT) Button