Epson LABELWORKS PX Panduan Operator - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pembuat label Epson LABELWORKS PX. Epson LABELWORKS PX 14 halaman.
Juga untuk Epson LABELWORKS PX: Panduan Pengguna (4 halaman)
Halaman Cetak
Initializing this Product
The product may stop functioning due to static electricity or other causes.
Initialize the product if it does not operate normally such as the display is
interrupted.
Initialize the product. Take extreme care before initializing it.
All the created text will be deleted. The settings you made for
character input will return to the default.
1. Press
.
2. Press and hold
+
, and press
3. When a message appears, press
The product will be initialized.
To abort: Press any button other than
Cleaning
When the exterior is dirty
Wipe the dirt off with a soft cloth. If it is very dirty, use a cloth wrung out of water.
Never use chemicals or solvents such as benzine, thinner, or
alcohol, or use a chemical duster.
When the printhead is dirty
If the print becomes faint or some parts
are missing, there may be some dirt on the
printhead.
Clean the print head with a cotton swab
moistened with medical alcohol (commercially
available ethanol).
If none of the above has solved the problem or symptom is different
than listed above, contact the Epson Labelworks Customer Support
Center at 800-622-6312 or visit support at Labelworks.Epson.com
.
.
.
13