Motorola GP68 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Radio Portabel Motorola GP68. Motorola GP68 20 halaman. A high performance radio in a class of its own
Juga untuk Motorola GP68: Panduan Instalasi dan Pengoperasian (44 halaman), Panduan Pengoperasian (19 halaman), Manual (18 halaman), Panduan Servis (13 halaman)

Halaman Cetak

Edit the Channel Scan List

Rotate the selector switch to select the St menu item.

Use

(Left Arrow) or

to 20).

A flashing channel number indicates that the channel is excluded from the scan list.

A channel number that lights continuously indicates the channel is included in the

scan list For example, a display showing 18 with flashing digits indicates that

channel 18 is excluded from the scan list

Press the Toggle Light/Enter Button to toggle the state of a channel in the scan

list from included to excluded, or from excluded to included.

4.To exit the scan list edit mode, select another menu item by turning the selector

switch.

Deleted a Programmed Channel

Rotate the selector switch to select the "ErAChn" menu item.

Use (Left Arrow) or (Right Arrow) to scroll through the channels (01 to 20).

Press the Toggle Light/Enter Button, the selected channel should flash.

Edit Phone Access/Deaccess Codes

Rotate the selector switch to select the appropriate menu item.

Press any key (except the Toggle Light/Enter Button) to enter the edit mode The

LCD displays the currently programmed access/deaccess code. For a code, which

exceeds the 6-digit display length, the rightmost digit flashes to indicate more digits

exist on the right. You can now change or enter digits as required, up to a maximum

of 8, using any of the numeric keys, as well as the *, #, A, B, C, and D keys. The

flashing cursor indicates the position of the next digit to be entered.

To change the access/deaccess code, Use

Arrow) to scroll through the existing code's digits and

digits then enter the new digits. The display shows the new digits as they are being

entered. When the flashing cursor is under a digit the maximum number has been

entered.

One or more 'pause' digits can be entered between successive digits of phone

access /deaccess codes by pressing

(#). A pause digit is displayed as '-' (a dash). A pause digit causes the radio to wait

in between transmission of the DTMF tones programmed before and after the

pause.

Press the Toggle Light/Enter Button to store the new code and return to the SPM

Browse menu

To abort the data entry, select another menu item by turning the selector switch

or wait until the edit mode times-out (after 5 seconds of inactivity).

(Right Arrow) to scroll through the channels (01

(Left Arrow) or

(Lock/*) immediately followed by

(Right

(X) to erase unwanted