Motorola GTX LTR Panduan Servis - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Servis untuk Radio Portabel Motorola GTX LTR. Motorola GTX LTR 30 halaman. Motorola portable radios service manual
Halaman Cetak
GTX/GTX LTR/LTS 2000 Portable Radios Service Manual
Relabeling
The repair facility shall have a method by which the replacement of FMRC Approval labels are controlled to ensure that any
relabeling is limited to units that were originally shipped from the Manufacturer with an FM Approval label in place. FMRC
Approval labels shall not be stocked by the repair facility. An FMRC Approval label shall be ordered from the original manu-
facturer as needed to repair a specific unit. Replacement labels may be obtained and applied by the repair facility providing
satisfactory evidence that the unit being relabeled was originally an FMRC Approved unit. Verification may include, but is not
limited to: a unit with a damaged Approval label, a unit with a defective housing displaying an Approval label, or a customer
invoice indicating the serial number of the unit and purchase of an FMRC Approved model.
Do Not Substitute Options or Accessories
The communications equipment package that Motorola submits to FMRC for testing and approval is tested as a system that
consists of the communications unit itself and the battery, antenna and other options or accessories that make up the rest of the
package to be approved. This approved package must be strictly observed and there must be no substitution of items, even if the
substitute you wanted to consider appears as an approved accessory elsewhere in the Guide for some other communications
equipment unit. Approved configurations are listed by FMRC Approved Product in the annual Approval Guide published by
FMRC. That guide, and the Approval Standard Class Number 3605 document, can be ordered from the following address.
Training Resource Center, Publications-Order Processing Dept.
Factory Mutual Engineering and Research
1151 Boston-Providence Turnpike
PO Box 9102
Norwood, MA, 02062
Telephone: (617) 762-4300
Vehicles Equipped with Air Bags
When planning the installation of communication equipment in a vehicle with one or more air bags, proceed as follows:
•
Installation of vehicle equipment should be performed by a professional installer/technician qualified in the
requirements for such installations. An air bag's size, shape and deployment area can vary by vehicle make,
model and front compartment configuration (e.g., bench seat vs. bucket seats).
•
Contact the vehicle manufacturer's corporate headquarters, if necessary, for specific air bag information for the
vehicle make, model and front compartment configuration involved in your communication equipment instal-
lation.
February 1997
Vehicles equipped with air bags.
An air bag inflates with great force. DO NOT place objects, including
communication equipment, in the area over the air bag or in the air bag
deployment area. If the communication equipment is improperly installed and
the air bag inflates, this could cause serious injury.
68P02948C90-O
Foreword
Vehicles Equipped with Air Bags
xix