Motorola BT-354 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Motorola BT-354. Motorola BT-354 13 halaman.

Step 8:

The mobil phone found a headset.

Press the SELECT button to initiate the PAIRing.

Step 9:

The mobil phone asked for a PAIRing.

Press the YES button to confirm the PAIRing connection.

Step 10 :

When asked the Passkey by the mobile phone, enter 1234,

then press the OK button to confirm it. (Note: The 1234

is the default pin-code stored in the headset.)

When pairing is complete, headset will be operating in its

normal mode. In this mode, the blue LED on the headset

will blink once per two seconds. (at a slower speed than in

pairing mode)

If no pairing is possible for a period of time (approx. two minutes),

the headset will automatically power off, and the previous pairing

(if any) is revoked. You may need to repeat steps from 1 to 10 until

pairing succeeds.

If the headset is not in pairing mode, your mobile phone can not

find it. You must configure the headset in pairing mode before your

mobile phone searching for it.