Motorola clp446 Panduan Pengguna - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Motorola clp446. Motorola clp446 46 halaman. Clp series two-way radio
Juga untuk Motorola clp446: Instruksi Pengguna (9 halaman), Referensi Cepat (35 halaman)
Halaman Cetak
Note:
If the radio is ON while charging, it takes longer to
fully charge.
5.
Insert the radio facing down (with battery
installed) into the charging pocket, making
sure the radio contacts are aligned with the
MUC contacts.
Note:
The battery can be charged by itself using the slot
on the flat surface of the charging pocket.
Charging Status LEDs
On the drop-in charger, the radio charging pocket
has an LED Charger.
On the MUC, each of the 6 charging pockets has
an LED. The LEDs are grouped into pairs to show
which charging pockets are paired. The LED is red
when the battery is charging. It turns to green
once the battery is fully charged.
Note:
This Multi Unit Charger allows you to clone up to
2 radios (2 Source radios and 2 Target radios).
For more details, refer to "Radio Cloning" Section
on page 21.
16
English
•
For part number details, refer to the"Accessories"
Section on page 36.
Charger LED Indicator
Status
LED Status
Charging
Steady
Red
Indication
Charge
Steady
Complete
Green
Indication
Battery
Blinking
Fault (*)
Red
Note:
The LED is red when the battery is charging. It
turns to green once the battery is fully charged.
Note:
(*) Re-seating the battery pack likely corrects
this issue.
Comments
The charger is
currently charging.
Battery is fully
charged.
Battery was faulty
when inserted.