Motorola Noise-com ENMN4010 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Headset Motorola Noise-com ENMN4010. Motorola Noise-com ENMN4010 32 halaman.

Ensure the noise-com flanges, Fig. 1 (2), fit

behind the solid washer which is located

behind the soft cushions inside the ear

protector cup. Do not use excessive force!

3. Turn the noise-com

clockwise in the

cup as shown.

4. Pull the cups

outward and position

the combined

noise-com and ear

protectors over your

ears so that the ear

cushions fully enclose the ears and seal tightly

against your head.

5. Bend the microphone boom gently towards

your mouth. To obtain maximum sound quality

and ambient noise cancellation the

microphone must be kept close to the lips at a

distance of 10-15mm.

Note: If you want to change the side of the

ear protector on which the noise-com is

attached (e.g. from left to right), twist the

microphone boom gently 180

above (1) and the microphone end 45

shown above (2). Return to Step 1 of the

Installation section to complete the

installation of the noise-com into the ear

protectors.

180

as shown