Motorola Verizon moto g6 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Motorola Verizon moto g6. Motorola Verizon moto g6 26 halaman. Wireless bluetooth headset
Juga untuk Motorola Verizon moto g6: Panduan Pengguna (32 halaman), Lembar Faq (15 halaman), Panduan Pengguna (5 halaman)
Halaman Cetak
PRESSURIZED ALUMINUM PARTS HAZARD
Use of fluids that are incompatible with aluminum in pressurized equipment can cause
serious chemical reaction and equipment rupture. Failure to follow this warning can
result in death, serious injury, or property damage.
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated
•
hydrocarbon solvents or fluids containing such solvents.
Many other fluids may contain chemicals that can react with aluminum. Contact
•
your material supplier for compatibility.
PLASTIC PARTS CLEANING SOLVENT HAZARD
Use only compatible water-based solvents to clean plastic structural or pressure-con-
taining parts. Many solvents can degrade plastic parts and cause them to fail, which
could cause serious injury or property damage. See Technical Data in this and all
other equipment instruction manuals. Read fluid and solvent manufacturer's warnings.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on
skin, inhaled, or swallowed.
Read MSDS's to know the specific hazards of the fluids you are using.
•
Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted
•
with air.
Store hazardous fluid in approved containers, and dispose of it according to appli-
•
cable guidelines.
Always wear impervious gloves when spraying or cleaning equipment.
•
BURN HAZARD
Equipment surfaces and fluid that's heated can become very hot during operation. To
avoid severe burns:
Do not touch hot fluid or equipment.
•
Wait until equipment/fluid has cooled completely.
•
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in
the operating area of the equipment to help protect you from serious injury, including
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes
but is not limited to:
Clothing and respirator as recommended by the fluid and solvent manufacturer
•
Protective eyewear, gloves, and hearing protection
•
Installation
The Typical Installations shown in F
F
. 4 are only guides for selecting and install-
IG
ing system components. Contact your distribu-
tor for assistance in planning a system to suit
your needs.
6
859.0088
WARNING
Tighten Fasteners Before Setup
. 3 and
Before using the pump for the first time, check
IG
and retorque all external fasteners. Follow
Torque Instructions, page 16.