Motorola SURFboard SB6141 Instal Lembar
Jelajahi secara online atau unduh pdf Instal Lembar untuk Modem Motorola SURFboard SB6141. Motorola SURFboard SB6141 2 halaman. Docsis 3.0 cable modem
Halaman Cetak
SURFboard
®
DOCSIS
3.0 Cable Modem
®
Install Sheet
Product Setup
dditional product information is available in the SB6141 DOCSIS 3.0 Cable Modem User Guide. Please visit the
A
SB6141
www.motorola.com/us/support/
Connecting the Modem
1. Connect the coaxial cable (included) to the cable outlet and to the
Cable connector on the rear panel of the modem.
2. Plug in the power cord to an electrical outlet and to the Power port
on the rear panel of the modem.
3. Connect the Ethernet cable (included) to the Ethernet port on the
computer (or other device) and to the Ethernet port on the rear
panel of the modem.
Testing the Connection
1. Power on the computer and modem. Check that the Receive,
Send, and Online LEDs on the modem turn ON (not flashing).
See next page for more LED information.
Note: If all three LEDs did not turn ON, contact your service
provider.
2. Open a web browser of your choice, such as Internet Explorer,
Firefox, or Google Chrome.
3. Type any valid URL (for example, www.motorola.com) in the
address bar to test your network connection.
- If the web page opened, your cable modem was properly set up.
- If the web page did not open, you may have to set up your
Internet service or activate your cable modem with your current
service provider.
Motorola website: