Dimastech Easy V3.0 Panduan Perakitan - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Peralatan Uji Dimastech Easy V3.0. Dimastech Easy V3.0 10 halaman.

ASSEMBLY DimasTech Easy V.3.0 – STEP-9

- The Dimastech Easy V.3.0 has

the possibility to mount No.9

spacers VC015_M3_25mm_M-F

(15) in any of the No.15 M3

threaded holes available to you

according to the type of

motherboard you have purchased

or to the arrangement to You

preferred, the image has the sole

purpose of illustrating the possible

positions of the parts.

- Align the spacers

VC015_M3_25mm_M-F (15) to the

corresponding threaded holes M3

of the Dimastech Easy V.3.0 and

fasten, as shown in the figure beside.

ASSEMBLY DimasTech Easy V.3.0 – STEP-10

- Align the holes in the

motherboard (item not included)

with the spacers

VC015_M3_25mm_M-F (15), and

fasten with screws VC049_M3x6

(20), as shown in the figure beside.

The number of screws to be used

will be the same as the spacers

mounted according to the

motherboard, the image has the

sole purpose of illustrating the

possible positions of the parts.

Note: The number indicated in the brackets indicates the corresponding

identification in the table on the page No.2