Epson TM-T20 Panduan Referensi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Pembuat label Epson TM-T20. Epson TM-T20 4 halaman. Esc/pos
Juga untuk Epson TM-T20: Brosur (2 halaman), Panduan Pengguna (20 halaman), Lembar data (2 halaman), Petunjuk Untuk Menginstal (9 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman)
Halaman Cetak
Print Position Commands (continued)
ESC $ nL nH
Moves print position from the left edge of print area.
nL + nH×256: absolute print position
ESC \ nL nH
Moves the print position from current position.
nL + nH×256: relative print position (-32,768–32,767)
Panel Button Commands
ESC c 5 n
Enables or disables the panel buttons.
n = odd: Disable, n = even: Enable
Mechanism Control Commands
GS V m
Executes paper cut.
m = 0, "0", 1, "1"
GS V m n
Executes paper cut after feeding n dots.
m = "A" or "B"
Bit Image Commands
ESC
m nL nH d1...dk
∗
Stores bit image data in the print buffer.
nL + nH×256: number of horizontal dots
d: image data (column format)
vertical
horizontal
vertical
m
density
density
dots
0
203/2 dpi
203/3 dpi
8 dots
1
203 dpi
32
203/2 dpi
203 dpi
24 dots 3×(nL + nH×256)
33
203 dpi
Graphics Commands
GS ( L pL pH 48 112 48 bx by 49 xL xH yL yH d1...dk
GS 8 L p1 p2 p3 p4 48 112 48 bx by 49 xL xH yL yH d1...dk
Stores graphics data in the print buffer to the magnified
size specified by bx, by.
bx = 1 or 2: horizontal magnification
by = 1 or 2: vertical magnification
xL + xH×256: number of horizontal dots
yL + yH×256: number of vertical dots
GS ( L 2 0 48 50
or
GS ( L 2 0 48 2
Prints graphics data in standard mode.
NV Graphics Commands
GS D 48 67 48 kc1 kc2 48 49 d1...dk
Converts Windows BMP data and defines NV graphics data
to key code (kc1, kc2).
NV Graphics Commands (continued)
GS ( L pL pH 48 67 48 kc1 kc2 1 xL xH yL yH 49 d1...dk
GS 8 L p1 p2 p3 p4 48 67 48 kc1 kc2 1 xL xH yL yH 49 d1...dk
Defines NV graphics data to key code (kc1, kc2).
xL + xH×256: number of horizontal dots
yL + yH×256: number of vertical dots
GS ( L 6 0 48 69 kc1 kc2 x y
Prints NV graphics of key code (kc1, kc2) to the magnified
size specified by x, y.
x = 1 or 2: horizontal magnification
y = 1 or 2: vertical magnification
GS ( L 2 0 48 48
Transmits the entire capacity of NV graphics area.
Send data: "70" + Size + NUL
Size: "0"–"99999999" [bytes]
GS ( L 2 0 48 51
Transmits the unused capacity of NV graphics area.
Send data: "71" + Size + NUL
Size: "0"–"99999999" [bytes]
GS ( L 4 0 48 64 "KC"
Transmits the key code list for defined NV graphics.
Send data: "7r" + Is + [kc1,kc2]... + NUL
Is = 65: following send data group exists, Is = 64: not exist
[kc1,kc2]...: strings of key codes (0–80 bytes length)
GS ( L 5 0 48 65 "CLR"
number of d
Deletes all NV graphics data.
(= k)
GS ( L 4 0 48 66 kc1 kc2
nL + nH×256
Deletes NV graphics data of key code (kc1, kc2).
Download Graphics Commands
GS D 48 83 48 kc1 kc2 48 49 d1...dk
Converts Windows BMP data and defines download
fn=112
graphics data to key code (kc1, kc2).
GS ( L pL pH 48 83 48 kc1 kc2 1 xL xH yL yH 49 d1...dk
GS 8 L p1 p2 p3 p4 48 83 48 kc1 kc2 1 xL xH yL yH 49 d1...dk
Defines download graphics data to key code (kc1, kc2).
xL + xH×256: number of horizontal dots
yL + yH×256: number of vertical dots
GS ( L 6 0 48 85 kc1 kc2 x y
Prints download graphics of key code (kc1, kc2) to the
fn=50
magnified size specified by x, y.
x = 1 or 2: horizontal magnification
y = 1 or 2: vertical magnification
GS ( L 2 0 48 52
fn=67
Transmits the unused capacity of download graphics area.
Send data: "72" + Size + NUL
Size: "0"–"99999999" [bytes]
or
fn=67
fn=69
GS ( L 2 0 48 0
or
fn=48
or
GS ( L 2 0 48 3
fn=51
fn=64
fn=65
fn=66
fn=83
or
fn=83
fn=85
or
GS ( L 2 0 48 4
fn=52
Download Graphics Commands (continued)
GS ( L 4 0 48 80 "KC"
Transmits the key code list for download graphics.
Send data: "7s" + Is + [kc1,kc2]... + NUL
Is = 65: following send data group exists, Is = 64: not exist
[kc1,kc2]...: strings of key codes (0–80 bytes length)
GS ( L 5 0 48 81 "CLR"
Deletes all download graphics data.
GS ( L 4 0 48 82 kc1 kc2
Deletes download graphics data of key code (kc1, kc2).
Logo Print Commands
User-defined NV graphics can be set to top or bottom logo.
•
Top logo is printed in the events enabled by FS ( E (fn=64).
•
Bottom logo is printed when paper cut command is executed.
•
FS ( E 6 0 62 2 kc1 kc2 a n
Sets for top logo printing in NV memory.
kc1, kc2: user-defined key code for the logo
a: logo position ("0"=left, "1"=center, "2"=right)
n: number of lines to be removed after the logo print
FS ( E 5 0 63 2 kc1 kc2 a
Sets for bottom logo printing in NV memory.
kc1, kc2: user-defined key code for the logo
a: logo position ("0"=left, "1"=center, "2"=right)
FS ( E pL pH 64 2 [a1 n1]...[ak nk]
Enables or disables auto top logo printing.
a
function
48
Prints while feeding paper to cut position
64
Prints at power-on
65
Prints when Roll paper cover is closed
66
Prints when buffers are cleared in recovery from error
67
Prints after fed paper with Feed button
n = "0": Disables, n = "1": Enables
FS ( E 4 0 65 2 a n
Enables or disables logo printing temporarily.
a = "0": Top logo
n = "0": Enable
a = "1": Bottom logo
n = "1": Disable
FS ( E 3 0 61 2 c
Transmits set values for top or bottom logo printing.
c = "0": Set values for top logo
c = "1": Set values for bottom logo
c = "2": Extended set values for top logo
c
send data
"0"
"7H202" + kc1 + kc2 + pos + line + NUL
"1"
"7H212" + kc1 + kc2 + pos + NUL
"2"
"7H222" + fa + fp + fc + fe + ff + NUL
kc1, kc2: user-defined key code for the logo
pos: logo position ("0"=left, "1"=center, "2"=right)
line: number of removed lines after logo print ("0"–"255")
fa, fp, fc, fe, ff: flag for top logo print ("0"=disabled, "1"=enabled)
fa:
while feeding to cut position
fp:
at power-on
fc:
when cover closed
fe:
when recovered from error with buffer clear
ff:
when fed paper by switch
fn=80
fn=81
fn=82
fn=62
fn=63
fn=64
fn=65
fn=61