Epson TM-U590 Series Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Epson TM-U590 Series. Epson TM-U590 Series 11 halaman. How to connect printer with a wireless adapter
Juga untuk Epson TM-U590 Series: Brosur (2 halaman), Panduan Informasi Produk (4 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Manual (10 halaman)

Halaman Cetak

4. Turn the cassette knob on the

cartridge in the direction of the

arrow 2 or 3 times to remove

any slack.

5. Insert the ribbon, and rotate the

cassette knob 2 or 3 more times,

as shown in illustration 3 .

6. Make sure the ribbon has no

wrinkles or creases and is installed below the print head as

shown on the label inside the printer.

Inserting Slip Paper

Note:

Use only slip paper that matches the specification.

Do not use wrinkled or curled paper.

1. When the SLIP LED flashes, insert slip

paper, using the right edge of the slip

paper inlet as a guide (see illustration 4 ).

2. When you insert the slip into the inlet as

far as it will go, the sensor detects the

slip, the SLIP LED changes from flashing

to on, and the printer draws the paper in

and prints it.

3. After printing is complete, the SLIP LED goes off, and you can

remove the slip.

Troubleshooting

No lights on the control panel

Check that power supply cables are plugged into the printer, the

power unit, and power outlet correctly.

The printer sounds like it is printing, but nothing is printing

Check that the ribbon cassette is installed correctly.

Replace the ribbon cassette.

TM-U590/TM-U590P User's Manual 7

English