Epson 4000 - Stylus Pro Color Inkjet Printer Informasi Produk - Halaman 8

Jelajahi secara online atau unduh pdf Informasi Produk untuk Perangkat lunak Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 13 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Mulai dari Sini Manual (6 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Panduan Referensi Cepat (11 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Halaman Cetak

Epson 4000 - Stylus Pro Color Inkjet Printer Informasi Produk

Epson Stylus Pro 4000

3. Raise the ink lever to the unlocked position.

4. Remove the empty ink cartridge from the printer.

5. Make sure the replacement

cartridge is the correct color,

and remove it from its

package.

6. Gently shake the cartridge

before installing it.

7. Hold the cartridge with the

arrow pointing toward the

printer. Then insert the

cartridge into the slot. Don't force it in.

8 - Epson Stylus Pro 4000

8. Lower the ink lever to its locked position.

9. If you're using 110 ml cartridges, close the ink

compartment cover. If you're using 220 ml cartridges, you'll

have to leave the cover open.

Once the cartridge is installed, the printer returns to its

READY state (or says LOAD PAPER if paper isn't loaded).

Paper Type and Banding

Banding can be caused by several problems, such as clogged

print head nozzles or a misaligned print head. It can also be

caused by using a paper that is not defined in the Epson

printer driver or in a third-party RIP. To correct this problem,

make sure you select the correct paper type in the driver.

If your paper type is not defined, use the printer's SelecType

menu system to create a custom paper type. See "Optimizing

the Settings for Your Paper" in the Printer Guide.

Running a Nozzle Check and Cleaning

Cycle

If your printed image is unexpectedly faint or dots are missing

from the printout, you should check the print head to see if

any nozzles are clogged.

You can check the print head and turn on the Auto Cleaning

feature at the same time, using your printer utility software.

This enables the printer to print a nozzle check pattern, read

it, and automatically run a cleaning cycle if necessary.

1. Make sure paper is loaded in the paper tray.

2. Do one of the following to access the printer utilities:

Mac OS

X: Open the Epson Printer Utility in your

Applications folder. Select SPro 4000, and click OK.

Mac OS 9.x: Select Print, then click the

in the print dialog box.

4/04

utility button