Epson 4000 - Stylus Pro Color Inkjet Printer Mulai dari Sini Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Perangkat lunak Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 6 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Informasi Produk (13 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Panduan Referensi Cepat (11 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Load Roll Paper

Slide the black paper stop off the end of

the spindle.

If the paper has a 2-inch core, remove the adapters

by pressing the four tabs.

Make sure your hands are clean, and avoid touching the printable surface of the paper.

Note:

Try to handle paper by the edges. Make sure you don't rub or scratch the coating or dent the

edges of the paper.

Position the roll so the paper unwinds as shown,

then slide it onto the spindle.

Slide the black paper stop back onto the spindle.

Insert it firmly into the end of the roll.

Open the roll paper cover.

Place the paper and spindle in the printer as

shown, with the gray end on the right.

Make sure the printer is powered on and

ready. Press the

the

Release the paper lever.

Hold both sides of the paper and feed it into the slot until the paper

is aligned with the OTHER mark and the vertical line on the paper tray

cover. Then move the paper lever to the secured position.

Raise the roll paper support on top of the

paper tray. Then close the roll paper cover.

Paper Source button until

roll paper icon appears.

Roll paper cover

Paper

Source

button

vertical line

OTHER mark