Epson 410W - PowerLite WXGA LCD Projector Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson 410W - PowerLite WXGA LCD Projector. Epson 410W - PowerLite WXGA LCD Projector 42 halaman. Remote control information
Juga untuk Epson 410W - PowerLite WXGA LCD Projector: Panduan Pengaturan Cepat (6 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (1 halaman), Spesifikasi (2 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pengguna (2 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Buku Panduan Instalasi (5 halaman)

Registering and deleting projectors for monitoring

Registration by specifying an IP address (Manual

registration)

Procedure

Right-click in Grouping view and select "New" - "Projector

(manual registration)".

The following window will be displayed.

If Detail list view is displayed, select "New" - "Projector (manual

registration)" from the Edit menu.

You can also carry out this operation by selecting New - Projector

(manual registration) from the Edit menu.

Enter the IP address of the projector to be registered in the

"IP address" box and then click "Search". When the message

is displayed, click "OK".

If using a serial TCP/IP conversion adapter and cable to connect

the projector, select Use Serial TCP/IP conversion adaptor. Enter

the port number in Port Number and then click Search.

After searching is complete, enter the information for the

projector to be registered while referring to the table below.

Display name

Enter the name of the projector(s) to be displayed

in Grouping view or Detail list view. Up to a

maximum of 32 bytes can be entered. A space

cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in Grouping

view or Detail list view.

Parent group

Select when registering a projector in a group. If

no groups have been created, this cannot be

selected.

s "Registering several projectors to a

monitoring group all at once"

Projector

This shows the name that has been registered on

name

the projector.

IP address

This shows the IP address that you entered in step

Use Serial

Select this if using a serial TCP/IP conversion

TCP/IP

adapter to connect the projector.

conversion

adaptor.

p.18