Epson 410W - PowerLite WXGA LCD Projector Panduan Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Epson 410W - PowerLite WXGA LCD Projector. Epson 410W - PowerLite WXGA LCD Projector 6 halaman. Remote control information
Juga untuk Epson 410W - PowerLite WXGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (1 halaman), Spesifikasi (2 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pengguna (2 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Buku Panduan Instalasi (5 halaman)

Epson 410W - PowerLite WXGA LCD Projector Panduan Pengaturan Cepat
3

Choose a location

You can set up the projector in a variety of ways. The projector's short-throw
lens leaves plenty of room for your audience and allows you to present
comfortably in front of them without casting a shadow on the screen.
To install the projector in a classroom or
other setting, you can mount the projector
to a wall or compatible whiteboard using
an optional Epson wall mounting system.
Using an interactive whiteboard, you can
even control your computer presentation
by touching the projected display on the
board surface.
If you'll need to take the projector from
place to place, you can set it up on a table
or cart in front of the screen.
You can also mount the projector from the ceiling and/or project from the
rear using a translucent screen. If you project upside-down from a wall or the
ceiling, or from the rear, you'll need to select the correct projection option in
the projector's Extended menu. See the User's Guide on your CD-ROM for
instructions.
The distance between the projector and the screen determines the size of the
image, and can vary depending on the aspect ratio (width-to-height ratio) of
the image and your screen. Ideally, you should place the projector between
22 and 48 inches (56 and 122 cm) from the screen or whiteboard. Be sure to
include the slight offset from the center of the projector's lens to the edge of
your image.
Here are the approximate distances and offsets you should use in placing the
projector for images displayed in the projector's native 16:10 aspect ratio:
16:10 aspect ratio
To calculate the distance and offset for 4:3 or 16:9 aspect ratio images or
projection surfaces, see the User's Guide on your CD-ROM. (For more help
determining the size of your image, use the Image Size Calculator on the
Multimedia Projectors page on Epson's website.)