Epson 4880 - Stylus Pro Color Inkjet Printer Manual Jaringan - Halaman 12

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Perangkat lunak Epson 4880 - Stylus Pro Color Inkjet Printer. Epson 4880 - Stylus Pro Color Inkjet Printer 46 halaman. Ink fill for the refillable cartridge system
Juga untuk Epson 4880 - Stylus Pro Color Inkjet Printer: Panduan Instalasi Mulai Cepat (1 halaman), Panduan Instalasi (4 halaman), Panduan Informasi Produk (16 halaman), Garansi Terbatas (12 halaman), Petunjuk Penggunaan (5 halaman)

Halaman Cetak

Epson 4880 - Stylus Pro Color Inkjet Printer Manual Jaringan

4. If the necessary components are not in the list, click Install to install them.

5. For LPR or Internet printing:

Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area Connection

Properties dialog box to open the Internet Protocols Version 4 (TCP/IPv4) Properties

dialog box. Set the IP address, the subnet mask, etc. and then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section "Connecting the Network

Interface to the Network" on page 14.

Windows XP

For Windows XP, use the following procedure to install the necessary components.

Note:

❏ The Windows XP CD-ROM may be required during the installation.

❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and

the default gateway of the computer.

1. Click Start, highlight Control Panel, and then click Network and Internet

Connections. Select Network Connections.

2. Under LAN or High-Speed Internet, click the Local Area Connection icon.

3. Under Network Tasks, click Change settings of this connection.

4. Check if the following necessary components are in the list.

Setting Up Your System for Network Printing