Epson 755c - PowerLite XGA LCD Projector Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 42 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 755c - PowerLite XGA LCD Projector: Panduan Pengoperasian (36 halaman), Lembar Spesifikasi (2 halaman), Manual Suku Cadang (26 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Item yang Dapat Diganti Pengguna (1 halaman), Pengaturan Cepat (2 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Manual Fungsi (5 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Operating environment

Limitations imposed by a Windows Vista

environment.

When using EMP Monitor under Windows Vista, note the following

limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EMP Monitor.

• Even after EMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EMP Monitor V4.30 folder.

Provided the default settings were used at installation, this folder can be

found at:

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.30"

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows

Vista, the computer must be started up in Administrator mode.

• Depending on the projector model, a commercially-available serial

TCP/IP conversion adapter and a connection cable are required in

order to use EMP Monitor. s Projector User's Guide "

Make the settings for the serial TCP/IP conversion adapter before

connecting to the projector.