Epson 755c - PowerLite XGA LCD Projector Buletin Dukungan Produk - Halaman 8

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Perangkat lunak Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 15 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 755c - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Lembar Spesifikasi (2 halaman), Manual Suku Cadang (26 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Item yang Dapat Diganti Pengguna (1 halaman), Pengaturan Cepat (2 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Manual Fungsi (5 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (22 halaman)

Settings Display

Uncheck the boxes for the buttons

that you do not want to display in

Advanced Mode.

[Note] Be sure to set the projector to Network ON in Standby Mode in the Extended Menu.

1) Download "Epson12378.exe" from Epson website. This file contains

"ProjectorControlSetup.exe" which is used to install EPSON Projector Control for

Windows V.1.00 on the computer.

2) Set up your computer and the projector to connect over a network.

3) Start the EPSON Projector Control software as follows: "Start" "Program" "EPSON

Projector" "Projector Control V1.00." Then the main screen is displayed. Click

"Tool" "Settings" on the main screen. The setting screen is displayed.

4) Enter the Projector IP Address, click "OK" to save, and close the setting screen.

Page 4 of 5

PSB.2007.09.001

Uncheck the boxes for

the buttons that you do

not want to display in

Simple Mode.