Epson 7800 - Stylus Pro Color Inkjet Printer Manual Pembongkaran dan Pengaturan - Halaman 9

Jelajahi secara online atau unduh pdf Manual Pembongkaran dan Pengaturan untuk Perangkat lunak Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 halaman. Stylus pro 800 series
Juga untuk Epson 7800 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (8 halaman), Spesifikasi (4 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Panduan Referensi Cepat (12 halaman), Panduan Tambahan (1 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Buletin Dukungan Produk (10 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

4. Fasten the bottom of the printer and base unit

with wing nut, spring washers, and washers

(H).

5. Release the front casters and the stabilizer

knobs and move the printer to the place of use

(a short distance away). Lock the casters and

extend the stabilizer knobs after moving.

6. Remove the protective tapes.

from the front cover

from the ink compartment cover

from the maintenance tank

7. Open the front cover. Remove the protective

screw (L) and metal plate (M) from the side of

the print head compartment. (Follow the red

wire (N) fixed on the cover of the printer and

you can see the screw at the edge of the wire.)

Caution:

Watch your fingers when opening and

closing the front cover.

Protective screw

Protective metal plate

Red wire

Note:

Do not re-install the screw and the metal plate.

Store them separately to avoid losing them.

8. Close the front cover.

Attaching the Paper Basket

1. Fully insert and attach the upper basket hooks

(D) to the upper guides of the base upright left

and right.