Epson 7800 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Perangkat lunak Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 12 halaman. Stylus pro 800 series
Juga untuk Epson 7800 - Stylus Pro Color Inkjet Printer: Manual Pembongkaran dan Pengaturan (27 halaman), Brosur & Spesifikasi (8 halaman), Spesifikasi (4 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Panduan Tambahan (1 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Buletin Dukungan Produk (10 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

Open the front cover. (The cover has special tabs

that act as paper supports when the cover is open.)

Feed the posterboard into the paper slot until it

meets resistance.

Note:

If you're using stock more than 39 inches

long (Epson Stylus Pro 9800 only), load it long edge

ﬁrst (in landscape orientation).

Align the board with the mark on the roll paper

cover.

Return the paper lever to the locked position. Then

close the front cover.

Press the

Pause button. The board feeds into

the printing position automatically and READY

appears on the control panel.

Run your print job. After it is ﬁnished, the

posterboard stays in the printer.

To remove the print, hold it and release the

paper lever.