Epson 7850p - PowerLite XGA LCD Projector Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 12 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 7850p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Suku Cadang Pengganti (1 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Panduan Instalasi (5 halaman), Pengaturan Cepat (2 halaman), Brosur & Spesifikasi (2 halaman), Panduan Informasi Produk (25 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

note

See your Apple documentation

for instructions on setting up

your Macintosh.

note

Use either ESSID ad hoc

(computer-to-computer) mode

or Access Point (infrastructure)

mode when you set up your

projector. Channel ad hoc

mode is not supported for

Macintosh.

See the User's Guide for

information about the ESSID.

5. For optimal performance, set your screen resolution to

1024 × 768 or lower with a color depth of thousands of colors.

6. Click the AirPort icon on the Application bar at the top of the

Macintosh desktop. You see a pull-down menu like this:

7. Check to make sure AirPort is turned on.

8. Select your projector's ESSID from the pull-down menu.

If you don't see the projector's ESSID, see page 8 for

troubleshooting tips.

Projecting Wirelessly

Before you begin, make sure you've inserted the EPSON wireless

(802.11b) card in the projector and followed the steps beginning on

page 5 to set up your Macintosh.

1. Double-click the

EMP NS Connection

folder.

icon in your Applications