4
If you see a blank screen or the No Signal message, make sure the
power light on the projector is green and not flashing, and the lens
cover is off. If the screen is still blank, restart your laptop, or press the
Comp button on the remote control again. If mute mode is active,
press the A/ V Mute button on the remote control.
Windows
:
Hold down the Fn button on the keyboard and press the
®
function key that lets you display on an external monitor. It may have
an icon such as
, or it may be labeled CRT/LCD.
5
If your projector and laptop don't display the same image, do
the following:
Windows:
Try using the CRT/LCD or
above. If this doesn't work, double-click Display in the Control Panel.
Make sure both the LCD screen and monitor port are enabled. (Allow a
few seconds for the projector to sync up.) See your Windows online help
for details.
Macintosh
®
OS X:
From the Apple menu, select System Preferences,
then click Displays. Select the VGA Display or Color LCD dialog box,
click the Arrange (or Arrangement) tab, and make sure Mirror
Displays is checked.
Click here
Make sure this
is checked
Macintosh OS 9 or earlier:
Panels, then click Monitors or Monitors and Sound. Click the
Arrange icon, then drag one monitor icon on top of the other; this
lets you display on both the projection screen and the LCD screen.
If this option isn't available, click the Monitor icon and select a
Simulscan resolution.
Click here
6
If you see an image but it's not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11b wireless network
from a computer running Windows 98, 2000, Me, XP, or Macintosh OS X
10.2.4 or above.
NOTE:
You must have already installed the projector's EasyMP software
and configured your projector and computer. See the User's Guide for
instructions. Also, your computer must have an 802.11b network card or
transmitter installed.
1
Make sure you've turned on the projector and adjusted the image
as described in sections 1 and 2 on the front of this sheet.
2
Select EasyMP as the source by
pressing the EasyMP button on the
remote control.
3
Insert the EPSON 802.11b card with
the blue label facing outward, as
shown. When fully inserted, the
black end of the card will protrude.
NOTE:
Use only the EPSON 802.11b card. Other brands may not be
compatible and are not guaranteed to work.
function key, as described
From the Apple menu, select Control
Drag one monitor
icon onto the other
Once the card is inserted, you see a screen like this:
Projector keyword
(optional)
4
From the computer's Start menu, select EMP NS Connection
(Windows), or double-click the EMP NS Connection icon in your
Applications folder (Macintosh).
5
If you see this screen, select the name and IP address for your
computer's 802.11b wireless card and click OK.
You see this screen:
If the connection is working properly, you see your projector listed
as shown. If you don't see your wireless device listed, restart your
computer. If it still doesn't appear, see the User's Guide for help.
6
Once the name of your projector appears, select it and click Connect.
7
If you see a message asking for a keyword, enter the four digits that
appear on the EasyMP Network Screen and click OK. (See the screen at
the top of this column to locate the projector keyword.)
You see your computer 's image transmitted to the projector, and a
floating control bar appears on the screen:
8
When done with your presentation, click D i s c o n n e c t on the control bar.
Where To Get Help
Telephone Support Services
To use the EPSON PrivateLine
®
enter the PIN on the EPSON PrivateLine Support card included in your
Start Here kit. This service is available 6
through Friday, for the duration of your warranty period. You may also
speak with a projector support specialist by dialing one of these numbers:
U.S.:
(562) 276-4394, 6
AM
Monday through Friday
Canada: (905) 709-3839, 6
AM
Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services
EPSON provides assistance through electronic support services 24 hours a
day at http://support.epson.com. For tips, templates, and training for
developing successful presentations go to http://www.presentersonline.com.
EPSON is a re g i s t e red trademark and EasyMP is a trademark of SEIKO E P S O NC O R P O R ATION. PowerLite and PrivateLine are
re g i s t e red trademarks of Epson America, Inc.
General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners.
EPSON disclaims any and all rights in those marks.
© 2003 by Epson America, Inc. 12/03
Select your projector
Click here
to minimize
Support service, call (800) 637-7661 and
to 6
, Pacific Time, Monday
AM
PM
to 6
, Pacific Time,
PM
to 6
, Pacific Time,
PM
C P D - 1 6 3 9 6 R 1
Printed in XXXXXXXXX
Halaman Cetak