Philips 13PR15C Panduan Pemilik - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk TV Philips 13PR15C. Philips 13PR15C 20 halaman. Philips 13pr15c: user guide
Juga untuk Philips 13PR15C: Lembar Spesifikasi (2 halaman)

Halaman Cetak

lease make these simple

checks before calling for ser-

vice. These tips can save you

time and money since charges for

TV installation and adjustment of

customer controls are not cov-

ered under your warranty.

No Power

No Picture

No Sound

Remote Does Not

Work

TV Displays Wrong

Channel or No

Channels Above 13

Cleaning and Care

• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using

anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when

cleaning.

• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean

dry cloth to dry the wiped surfaces.

• Occasionally vacuum the ventilation holes or slots in the cabinet back.

• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring

of the cabinet finish.

IPS

OMETHING

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or

TV information channel) which shows a constant non-moving pattern on the TV screen,

can cause picture tube damage. When your TV is continuously used with such a source

the pattern of the non-moving portion of the game (CDI, etc.) could leave an image

permanently on the picture tube. When not in use, turn the video source OFF.

Regularly alternate the use of such video sources with normal TV viewing.

• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into

outlet and push POWER button again.

• Check to be sure outlet is not on a wall switch.

• Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug ?

• Check the TUNING ANTENNA/CABLE control for correct position.

• Check INPUT control for correct position. The EXT 1 position with out a signal

source will result in a blank screen.

• Check the VOLUME buttons.

• Check VOLUME LIMIT control.

• Check the MUTE button on the remote control.

• If attempting auxiliary equipment hook-ups, check audio jack connections.

• Check batteries. Replace with AAA Heavy Duty (Zinc Chloride) or Alkaline batteries

if necessary.

• Clean the remote and the remote sensor window on the TV.

• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into

outlet and push POWER button again.

• Check to be sure TV outlet is not on a wall switch.

• Repeat channel selection.

• Add desired channel numbers (CHANNEL EDIT control) into TV memory.

• Check TUNING ANTENNA/CABLE control for correct position.

This TV is equipped with protective circuitry that shuts the TV off in case of moderate

power surges. Should this occur turn the TV back on by pressing the POWER button

once or twice, or unplug (wait 10 seconds) and then replug the power cord at the AC

outlet. This feature is NOT designed to prevent damage due to high power surges such

as those caused by lightning, which is not covered by your warranty.

ORKING