Philips 14PV307 Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Philips 14PV307. Philips 14PV307 20 halaman. Tv-video combi
Halaman Cetak
SMART picture
You can change the picture setting during playback.
1.
1.
Press
SMART PICTURE
ture setting.
2.
2.
Press
SMART PICTURE
ture setting of your choice.
'NATURAL': best all-purpose-setting to watch
a well-recorded tape (natural picture).
'SPORTS': accentuate the details. Valuable to
watch high quality tapes or recorded sport events.
'MOVIE': to get the best picture when you
play a movie.
'WEAK SIGNAL': for rented tapes. It reduces
the noise, making the picture more enjoyable.
'VIDEO GAMES': best setting when playing a
video game.
5. Playback
Playing back cassettes
You can operate the TV-Video Combi using the
remote control or the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1.
1.
Put a cassette into the cassette slot. The cas-
sette is inserted automatically.
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
Picture/ sound quality is poor
When playing back rental videos or older, poor-
er quality cassettes, it may not be possible to
completely filter out picture and sound interfer-
ence. This is not a fault in your machine. Read
the section 'Manual tracking'.
2.
2.
Press
to view the tape.
PLAY B-K
3.
3.
To stop the playback, press
on the TV-Video Combi.
STOP/EJECT
4.
4.
To eject the cassette, press
the TV-Video Combi stops the playback.
Do I need to change the playback speed when
playing back LP recordings?
During playback, the correct speed will automati-
cally be selected. For more information, please
read the section 'Selecting the recording speed
(SP or LP)' in the chapter 'Manual recording'.
to show the current pic-
again to select the pic-
or
STOP
C-L
when
STOP/EJECT
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off automati-
cally after a predetermined period.
1.
1.
Press
.
SLEEP
2.
2.
Press
repeatedly to extend the time
SLEEP
until switch-off in 30 minute increments.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'
The machine now counts backwards to the switch-
off time.
The maximum time period to be set until switch-
off is 2 hours.
If you would like to turn this function off, press
on the remote control several times until
SLEEP
switch-off appears. '--:--' will appear on the screen.
To check the time until switch-off, press
the remote control.
If a recording is in process, switch-off function will be
cancelled.
Automatic switch-off of special functions
Many functions (e.g. pause, still picture) switch
themselves off automatically after a short time
in order to protect the cassette and to save
energy.
Playing back NTSC cassettes
This TV-Video Combi can also play back cas-
settes that have been recorded in SP [Standard
Play] or SLP [Super Long Play] mode in the
NTSC standard (for example, American cas-
settes). However, this only works on PAL-televi-
sion sets that are suitable for a picture frequency
of 60Hz.
Displaying current tape position
The following information is displayed on the
screen: e.g.: 0:02:45 shows the counter in hours,
minutes and seconds.
SP/LP: will show the recorded speed of your
cassette.
'REM 0:06': will show the remaining time left on
the tape in hours and minutes.
When you play back an NTSC cassette, the TV-
Video Combi will show 'REM -:--'.
9
on
SLEEP
EN
EN