Epson 826W - PowerLite WXGA LCD Projector Buletin Dukungan Produk - Halaman 13

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Perangkat lunak Epson 826W - PowerLite WXGA LCD Projector. Epson 826W - PowerLite WXGA LCD Projector 22 halaman. Epson powerlite 85/825/826w
Juga untuk Epson 826W - PowerLite WXGA LCD Projector: Panduan Pengguna (42 halaman), Spesifikasi (6 halaman), Panduan Pengoperasian (47 halaman), Pengaturan Cepat (4 halaman), Panduan Pengaturan Cepat (9 halaman), Panduan Pengguna (1 halaman), Spesifikasi (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (12 halaman), Panduan Memulai (9 halaman), Pernyataan Kesesuaian (4 halaman), Daftar Bagian (1 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Buku Panduan Instalasi (10 halaman), Buku Panduan Instalasi (3 halaman)

Epson 826W - PowerLite WXGA LCD Projector Buletin Dukungan Produk
Operating Status Report
When selecting the Keep Blocking button, the security alert message is closed and the
main screen of each application is displayed.
[EMP NS Connection Application]
Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not
detected.
The other applications operate normally. However, there is a case that execution of
automatic search disables automatic detection. This occurs when projectors are registered
for automatic detection in EMP Monitor before installing SP2, then the registered projectors
may not be detected again after SP2 installation. Therefore it is recommended to select
Unblock in the security alert screen.
If "Keep Blocking" has been selected when starting the application for the first
time, and the blocking needs to be removed, complete the execution of the application and
proceed with unblocking as follows:
a.) Start the Windows Security Center. Double click the icon in the shape of a shield that
is always displayed on the taskbar after the installation of SP2.
b.) Select and start Windows Firewall
Windows Security Center screen
Page 5 of 14
PSB.2004.10.002