Epson 836XL - Expression - Flatbed Scanner Informasi Produk - Halaman 2

Jelajahi secara online atau unduh pdf Informasi Produk untuk Perangkat lunak Epson 836XL - Expression - Flatbed Scanner. Epson 836XL - Expression - Flatbed Scanner 4 halaman. Product support bulletin(s)
Juga untuk Epson 836XL - Expression - Flatbed Scanner: Pembaruan Instalasi (8 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (11 halaman), Panduan Pengguna (24 halaman), Buletin Dukungan Produk (14 halaman), Pembaruan Instalasi Kartu Scsi (8 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman), Buletin Dukungan Produk (12 halaman)

Halaman Cetak
Epson 836XL - Expression - Flatbed Scanner Informasi Produk
EPSON Expression 836XL
Humidity:
Operation: 10% to 80%, without
condensation
Storage: 10% to 85%, without
condensation
Ordinary office or home conditions.
Avoid extremely dusty conditions, direct
sunlight, or strong light sources.
Safety Standards
EMC: FCC Part 15 subpart B class B (USA)
CSA C108.8 class B (Canada)

Parallel Interface Specifications

Bidirectional parallel interface
Interface type:
Data format:
Synchronization:
By external strobe pulse
Handshaking:
By ACKNLG and BUSY signals
Input/output data and interface control
Logic level:
signals are lTL compatible
Connector type:
Connector pin
arrangement:
Bidirectional parallel interface pin assignments
32
NC
33
GND
NC
36
DIR
I
EPSON Expression 636XL-2
1
at the receiving terminal must be longer
Not used
Ground
Not used
SCSl Interface Specifications
Interface type:
Logic level:
Electrical standard ANSI Standard X3.131-1986
ID number:
Connector type:
Terminator:
Connector pin
arrangement:
SCSI pin assignments:
44
45
46
47
146
49
Initialization
When the scanner is initialized (returned to a fixed set of
conditions), it terminates scanning and the carriage returns
to the home position (rear of the scanner).
1 O/9/97
ANSI Standard X3.131-1986
Selectable from 0 to 7
Two 50-pin connectors
Internal terminator selectable
ACK
I
RST
I
Reset
MSG
Message
SEL
I Command/data
Request
I I/O
I O
I
When the power is turned on
l
When the scanner parallel interface receives
l
an INIT signal (pin 31 goes LOW)
When the scanner receives a SCSI Reset
l
signal at the SCSI interface
command ESC @ (initialize the scanner)
When the scanner receives a SCSI Bus Device
l
Message
26
I
Scanners