Epson EasyMP Network Projection Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson EasyMP Network Projection. Epson EasyMP Network Projection 48 halaman. Multimedia projector
Juga untuk Epson EasyMP Network Projection: Panduan Pengoperasian (47 halaman), Petunjuk Pembaruan (4 halaman), Panduan Pengoperasian (50 halaman), Panduan Pengoperasian (50 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengoperasian (50 halaman), Panduan Pengoperasian (40 halaman), Panduan Pengoperasian (47 halaman)

Connecting to a Projector on a Network and Projecting

Clear list

Deletes all search results.

IP address (Advanced Connection Mode only)

The projector's IP address is displayed.

Display

Select the number displayed (when Use multi-display is selected). s

Profile

You can search for a projector on the network using a Profile saved

using Save in the profile. s

SSID (Quick Connection Mode only)

The projector's SSID is displayed.

Signal intensity

This is displayed when the connection is made in Quick Connection Mode. As the

Signal intensity increases, so does the number of lit indicators.

Update list (Quick Connection Mode only)

Updates Status and Signal intensity.

p.26

p.30

Using the Toolbar

The toolbar is displayed on the computer screen after EasyMP Network

Projection starts and a connection is made with the projector. You can use

this toolbar to operate and make settings for the projector.

Select target projector

Click to limit the projectors operated from the toolbar when projecting

from multiple projectors using the distribution function or Multi-

screen display. The indication below the icon shows the projectors that

can be controlled.

ALL indicates that all of the connected projectors can be controlled.

For example, when "1, 3" is displayed, projectors No. 1 and No. 3 can be

controlled.

Click

to display the following screen.

Select the projector to be controlled.

Indicates the No. of an allocated projector. This No. indicates the

No. of the projector that you can control from the toolbar.

Indicates the status of the projector.

Stop