Epson EMP Monitor Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson EMP Monitor. Epson EMP Monitor 14 halaman. Emp monitor for projectors
Juga untuk Epson EMP Monitor: Panduan Pengoperasian (11 halaman), Panduan Pengoperasian (12 halaman), Panduan Pengguna (42 halaman), Panduan Pengoperasian (34 halaman), Panduan Pengoperasian (37 halaman)

Halaman Cetak
Epson EMP Monitor Panduan Pengoperasian
Registering projectors for monitoring

Registration using IP address (Manual registration)

PROCEDURE
1
Click [Manual registration] in the [Register projector]
dialogue box.
2
Enter the IP address for the projector to be registered
in the [IP address] box, and then click [Confirm].
If a projector with the specified IP address is found on the
network, the projector's name will be displayed, so check that it
is the target projector. If it is not the target projector, re-enter
the IP address.
When using EMP-81/61
The following "Manually register projector" window will be
displayed.
Complete the form and click [Confirm].
Projector name
IP address
Use Serial⇔TCP/IP
conversion adaptor.
Port Number
Enter the port number.
Click to check the box.
3
Click [Add].
TIP
If a password entry screen is displayed, enter the password for the
projector's Administrator and then click [OK].
Enter the projector name of up to 16
alphanumeric characters, from 0 to 9
and from A(a) to Z(z) and - . You cannot
use a numeric-only name.
Enter the IP address of the projector.
Check the box.
Enter the port number.
Enter the projector name.
Enter the IP address.
6