Epson ES-300C Buletin Dukungan Produk - Halaman 4

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Perangkat lunak Epson ES-300C. Epson ES-300C 25 halaman. Laser & non-impact printer error codes
Juga untuk Epson ES-300C: Buletin Dukungan Produk (19 halaman), Manual (8 halaman), Panduan Tambahan (15 halaman), Manual (11 halaman), Buletin Dukungan Produk (20 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (13 halaman)

Halaman Cetak
Epson ES-300C Buletin Dukungan Produk
EPL-6000 cont.
ERROR 33
ERROR 40
FONT CARD ERROR

INSERTION ERROR

PAPER EMPTY
PAPER JAM
PAPER SIZE ERROR
PS CHANGE
EPL-7000 LCD Codes
NOTE:
In some cases, the red CONTINUE light flashes when an error is detected.
This requires you to correct the problem and then press the CONTINUE
button to dear the error. However, if the AUTO CONT option in SelecType is
set to ON, some errors may clear automatically even though the problem
remains.
Status messages are preceded by [S], warning messages are preceded by
[W], and error messages are preceded by [E]. In some cases the message
you see on your display also shows the printer mode.
[E] ADD MEMORY FOR CH-X
The printer has insufficient memory available in the channel displayed.
[E] CARD MEMORY OVERFLOW
This message indicates that the combined memory requirement of the cards in
slots A and B exceeds 4 Mbytes.
Thermistor error
Parity / Framing error
Font cartridge is bad (or is not inserted) correctly
Paper is not inserted correctly or has jammed at the paper
tray
No paper in the paper cassette
Paper cassette is not installed properly
Paper cassette lid is open
Paper sensor is bad
Paper is jammed inside the printer
Paper setting does not match the size of the paper in the
paper cassette
Paper size requested by the host conflicts with the
SelecType setting
PSB No: P-0077
Page: 3 of 11