CHANGE DRUM
COVER OPEN
CPU ERROR
ERROR 10
ERROR 11
ERROR 12
ERROR 20
ERROR 21
ERROR 22
ERROR 30
ERROR 31
ERROR 32
EPL-6000 cont.
ERROR 33
ERROR 40
FONT CARD ERROR
INSERTION ERROR
PAPER EMPTY
PAPERJAM
PAPER SIZE ERROR
PS CHANGE
------------------------------------------------------------------------------
EPL-7000 LCD Codes
NOTE:
In some cases, the red CONTINUE light flashes when an error is detected.
This requires you to correct the problem and then press the CONTINUE
button to clear the error.
is set to ON, some errors may clear automatically even though the problem
remains.
Status messages are preceded by [S], warning messages are preceded by
[W], and error messages are preceded by [E].
you see on your display also shows the printer mode.
[E] ADD MEMORY FOR CH-X
The printer has insufficient memory available in the channel displayed.
The drum needs to be changed.
not be installed, the cartridge may not be installed
properly or the cartridge may be defective.
Printer cover is open
Printer's CPU has made a calculation error
Program ROM error
Font cartridge or identity cartridge checksum error
RAM error
Memory overflow
Print overrun error
Receive buffer overflow
Memory error
Scanner error
Heater (Heat Roller Unit) error
Thermistor error
Parity / Framing error
Font cartridge is bad (or is not inserted) correctly
Paper is not inserted correctly or has jammed at the paper
tray
No paper in the paper cassette
Paper cassette is not installed properly
Paper cassette lid is open
Paper sensor is bad
Paper is jammed inside the printer
Paper setting does not match the size of the paper in the
paper cassette
Paper size requested by the host conflicts with the
SelecType setting
However, if the AUTO CONT option in SelecType
The drum cartridge may
In some cases the message
Halaman Cetak