Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts Mulai dari Sini Manual - Halaman 4

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Perangkat lunak Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts. Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts 8 halaman. Product support bulletin(s)
Juga untuk Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts: Informasi Produk (9 halaman), Spesifikasi (2 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (17 halaman)

Halaman Cetak

Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts Mulai dari Sini Manual

Connect the Scanner

Use a coin to turn the transportation lock counterclockwise to

the

unlocked position.

Connect the scanner to your computer.

If you're using USB...

Plug the

USB port. Then plug the

USB port on your computer or USB hub.

If you're using IEEE 1394 (FireWire

If you are using the optional FireWire interface, you must first

install the interface card in the scanner. See the instructions

in the User's Guide, and then return to this step.

Plug one end of the IEEE 1394 cable (not included) into the scanner's

IEEE 1394 port. Then plug the other end into the IEEE 1394 port on

your computer.

If you're using SCSI...

See the User's Guide for instructions on SCSI connection,

and then go to the next step.

Plug the scanner's power cord into the back of the scanner.

Then plug the cord into a grounded electrical outlet.

Press the

turn it on. The green READY light should blink for a few moments,

and then stay on.

Caution: If you turn off the scanner, wait at least 10 seconds before

turning it back on.

square end of the USB cable into the scanner's

OPERATE button on the front of the scanner to

Turn over

wide end into any available

)...

READY

light

OPERATE

button