Epson FX-1180 - Impact Printer Panduan Cepat - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Perangkat lunak Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 halaman. Epson serial impact dot matrix printers
Juga untuk Epson FX-1180 - Impact Printer: Setup Manual (33 halaman), Brosur & Spesifikasi (24 halaman), Informasi Produk (17 halaman), Panduan Referensi Cepat (16 halaman), Manual (11 halaman), Spesifikasi (2 halaman), Manual (18 halaman), Spesifikasi (2 halaman), Garansi Terbatas (1 halaman), Panduan Referensi (34 halaman)

Halaman Cetak
Epson FX-1180 - Impact Printer Panduan Cepat
c
Caution:
❏ It is best to load continuous paper
❏ Never feed labels backward using the
❏ Because labels are sensitive to
Temperature
Humidity
❏ Do not leave labels loaded in the
❏ Do not load continuous paper with
❏ Do not load paper that is curled or has
Downloaded from:
http://www.usersmanualguide.com/
with labels on the pull tractor.
Loading labels on the rear or the front
push tractor is not recommended.
Load/Eject or Tear Off/Bin
button. When fed backward, labels
can easily peel off the backing sheet
and cause a paper jam.
temperature and humidity, use them
only under normal operating
conditions described below:
15 to 25°C (59 to 77°F)
30 to 60% RH
printer between jobs; they may curl
around the platen and jam when you
resume printing.
labels from the rear paper slot.
Because the paper path from the rear
slot is curved, labels may come off
their backing sheets inside the printer
and cause a paper jam.
been folded.
EPSON FX-880+/FX-1180+ Quick Guide

Removing continuous paper with labels

To avoid peeling labels off the backing sheet
and jamming the printer, follow these steps
to remove continuous paper with labels
from the printer:
1. Tear off the fresh supply of continuous
labels at the perforation nearest the
paper entry slot.
* perforation nearest the paper entry slot
2. Hold down the LF/FF button to eject the
remaining labels from the printer.
c
Caution:
Never feed labels backward using the
Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily
come off the backing sheet and cause a
paper jam.
Special Papers (2/3)