ECI 1000-U LCD Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol ECI 1000-U LCD. ECI 1000-U LCD 18 halaman.

Halaman Cetak

6.2.3 X13 Controller interface

The voltage of controller interface signals are adjustable through the Input Voltage parameter located
under the Edit Parameters menu. These signals are AC/DC compatible.
DO3 – Open limit output to controller
DO10 – Open command input
DO7 – Close command input
DO4 – Nudging command input
DO18 – Door locking command input
DO17 – Close limit output to controller

6.2.4 X9 Connections

0V – Negative or return voltage for 54P from operator
54P - +54VDC power source from operator
RB1 and RB2 - External braking resistor located in operator
A1 and A2 – 48VDC output to motor

6.2.5 X4 and X5 connections

CAM switch assembly connectors. Refer to Figure 5 – CAM Switch Wiring

6.2.6 X7 and X10 Connectors

Heavy Door option connectors. These 2 connectors are the same pinout located on opposite sides of the
board for installation convenience.
24P – +24VDC power output
HDP – Heavy door +24VDC input
HDN – Heavy door 24VDC common input
0V – 24VDC common output

6.2.7 X8 Infra-red Door Detector Connections

Compatible with Memco model 640. Dry relay contacts to controller 250VAC/3A, 24VDC/3A
TX
RX
ECI 1000-U LCD Installation Manual
ORG
RED
BLU
WHT
WHT
ORG
BLU
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com
24P
EXAMPLE
HDP
USING
DRY CONTACT
HDN
0V
X8
LINK
NO
NC
COM
TRIG
0V
24P
RELAY
P a g e
| 8