Epson LQ-590 Panduan Pengguna - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson LQ-590. Epson LQ-590 48 halaman. 24pin dot matrix printers
Juga untuk Epson LQ-590: Manual (11 halaman), Referensi Cepat (12 halaman), Ringkasan Teknis (7 halaman), Spesifikasi (2 halaman), Spesifikasi (2 halaman), Spesifikasi (4 halaman), Mulai di sini (2 halaman)

Halaman Cetak
Epson LQ-590 Panduan Pengguna
1.
You may need to press
the Tear Off/Bin button to
advance the paper to the
tear-off position. Make
sure the Tear Off/Bin
lights are flashing (the
paper is at the current
tear-off position).
2.
Hold down the Pause
button for about three
seconds. The Pause light
begins flashing and the
printer enters Micro
Adjust mode.
3.
Open the paper guide cover, then press the LF/FF D button to feed
paper backward, or press the Load/Eject U button to feed paper
forward, until the paper perforation is aligned with the tear-off edge
of the printer cover.
Note:
The printer has a minimum and a maximum tear-off position. If you try to
adjust the tear-off position beyond these limits, the printer beeps and stops
moving the paper.
4.
Tear off the printed pages.
5.
Press the Pause button to turn off Micro Adjust mode.
When you resume printing, the printer automatically feeds the paper
back to the top-of-form position and begins printing.
32
Paper Handling
Tear-off edge of the printer cover
Paper perforation