Epson PCMCIA Software Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson PCMCIA Software. Epson PCMCIA Software 47 halaman. User manual - pcmcia card

Halaman Cetak

Starting the Configuration Utility

Follow these steps to start the configuration utility:

1. Log onto the directory containing your CardLite software.

2. Type CLCFG and press Enter. You see an introductory

screen about the Card Lite Configuration Utility.

3. Press Enter to continue. You see the CardLite Configuration

screen.

4. If you have an MS-DOS mouse driver installed, you can click

on the menu option to display the corresponding pull-down

menu. You can also press Alt together with the highlighted

letter of the option you want to use.

5. To select a menu option, you can click on the option, move

the cursor to the option and press Enter, or type the

highlighted letter of the option you want to use.

After you have selected an option from a pull-down menu, the

message bar at the bottom of the screen shows how to use

it. Also, you can press Enter for <OK>, F1 for <Help>, and

for <cancel>. To toggle an option on or off, highlight

it and press the space bar.

Editing PC Card Configurations

The Settings pull-down menu on the CardLite Configuration

screen provides options for editing modem and network cards.

It also allows you to specify when your system beeps.

Note

If your system is working properly, you don 't need to edit

any of the PC card configurations.

Using CardLite

2 - 3