Dimplex 6910000100 Panduan Servis - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Servis untuk Perapian Dalam Ruangan Dimplex 6910000100. Dimplex 6910000100 18 halaman.
Juga untuk Dimplex 6910000100: Panduan Servis (18 halaman)

Halaman Cetak

Heater Assembly Replacement

Tools required: Phillips head screwdriver

Needle nosed pliers

1. Follow "Preparation for Service" instructions before

proceeding.

2. Remove the 10 screws that secure the heater assem-

bly retaining bracket to the unit. Remove the bracket

and set aside.

3. Locate and remove the 4 screws that secure the as-

sembly to the unit.

CAUTION: When removing the blower assembly

mounting screws support the assembly to prevent any

damage to the unit.

4. Disconnect the wiring connections, noting their original

locations.

NOTE: Using a flat head screwdriver gently pry be-

tween the end of the connectors and the blower/fan to

release the wires.

5. Properly orient the new heater assembly and connect

all of the wiring connections.

6. Secure any excess wire using the provided cable ties.

7. Reassemble in the reverse order as above.

Figure 10

Mounting Screws

Retaining

Bracket