Dimplex 6910470100 Panduan Servis - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Servis untuk Perapian Dalam Ruangan Dimplex 6910470100. Dimplex 6910470100 17 halaman.
Halaman Cetak
Power Supply Replacement
Tools Required: Phillips Head Screwdriver
Side Cutters (to cut wire ties)
1. Follow the instructions for Preparing the Firebox for Service on page 6.
2. Remove the 4 screws that hold the electronics cover panel. (Figure 7)
3. Remove the 2 screws that hold the power supply bracket. (Figure 7)
4. Trace the wires from the defective power supply to the relay board.
5. Cut wire ties that secure the bundles of wire that include the wires from the power supply. Set the rubber sleeve
aside.
6. Replace the connections on the relay board from the defective power supply to the new power supply.
7. Reinstall the rubber sleeve around the bundle of wires and secure it using the 3 of the provided wire ties.
8. Secure the wires previously bundled using one of the provided wire ties.
9. Position the new power supply and secure it using the previously removed power supply bracket.
10. Reinstall the electronics cover panel.
11. Reassemble the fireplace.
Figure 7
8
Electronics
Cover Panel
Power Supply Bracket
www.dimplex.com