Epson PowerLite 1750 Panduan Pemeliharaan

Jelajahi secara online atau unduh pdf Panduan Pemeliharaan untuk Perangkat lunak Epson PowerLite 1750. Epson PowerLite 1750 2 halaman. Powerlite 1750
Juga untuk Epson PowerLite 1750: Panduan Pengaturan Cepat (4 halaman), Panduan Pengoperasian (20 halaman), Panduan Pengguna (25 halaman), Pernyataan Kesesuaian (4 halaman), Brosur & Spesifikasi (4 halaman), Buku Panduan Instalasi (4 halaman)

Epson PowerLite 1750 / 1760W / 1770W /1775W

Air Filter and Vent Maintenance

The projector's air filter keeps the intake air clean, and its vents expel the exhaust. If dust collects on the

air filter or vents, clean them as described in this manual. Dust clogs may cause the projector to overheat

due to improper ventilation.

Be sure to clean the air filter and vents if you see a message telling you to do so. Also make sure nothing

blocks the vents.

Cleaning the Air Filter and Vents

Be sure to clean the projector's air filter or vents if they get dusty, or if you see a message telling you to

clean them.

1. Turn off the projector and unplug the power cord.

2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as

a paintbrush).

Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in

water, or use any detergent or solvent to clean it.

3. If dust is difficult to remove or the air filter is damaged, replace the air filter.

Replacing the Air Filter

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace it

• The air filter is torn or damaged

You can replace the air filter while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

INSTALLATION HANDBOOK

Maintenance