Dimplex BF9000 Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perapian Dalam Ruangan Dimplex BF9000. Dimplex BF9000 19 halaman. Dimplex
Juga untuk Dimplex BF9000: Panduan Servis (17 halaman), Panduan Pemilik (20 halaman), Panduan Pemecahan Masalah (2 halaman), Panduan Pemilik (19 halaman), Panduan Servis (18 halaman)
Halaman Cetak
Fireplace Installation
Front glass Installation
1.
Carefully mount front glass
assembly so that the front
glass hooks (2) hang on the
front glass mounts on the
fireplace (2).
2.
Use the supplied two (2)
Phillips sheet metal screws
to fasten the glass assembly
tabs to the fireplace (Figure
5).
3.
Ensure the fireplace's
3-Position switch is switched
to the Off position (refer to
operation section).
Operation
A. 3-Position Switch
The switch has two on positions
marked. The " -- " position is
for manual operation. In this
position the built-in remote control
is by-passed. The " = " position
is for operating the unit with the
provided remote control. When in
remote control (" = ") position the
unit is operated with the On and
off buttons of the remote control.
When the switch is in the center
"o" position the unit is off.
4.
If unit is not hard-wired, plug
fireplace into a 15 Amp, 120
Volt outlet (refer to noTE 1).
Figure 5
B. Heater On/Off Switch
The Heat on/off switch supplies
power to the heater fan and the
heater element. When the switch
is in the On position the heater
operates if the thermostat calls for
heat.
C. Heater Thermostat Control
To adjust the temperature to your
individual requirements, turn the
thermostat control clockwise all
the way to turn on the heater.
When the room reaches the
desired temperature, turn
Tab
11