Epson PowerLite 1775W Buku Panduan Instalasi

Jelajahi secara online atau unduh pdf Buku Panduan Instalasi untuk Perangkat lunak Epson PowerLite 1775W. Epson PowerLite 1775W 4 halaman. Epson powerlite
Juga untuk Epson PowerLite 1775W: Panduan Memulai (9 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengaturan Cepat (4 halaman), Panduan Pengoperasian (20 halaman), Panduan Pengguna (25 halaman), Panduan Pengoperasian (50 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pemeliharaan (2 halaman), Spesifikasi (4 halaman)

Epson PowerLite 1750 / 1760W / 1770W / 1775W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Lamp and Status Information