ECKey EK6 series Panduan Pemasang - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemasang untuk Pengontrol Akses IP ECKey EK6 series. ECKey EK6 series 9 halaman. Internal/external mounting – red and green led control from access control system
Juga untuk ECKey EK6 series: Panduan Pemasangan dan Pengoperasian (15 halaman)

Halaman Cetak
3.
Open the chosen site and click add phone. The ECKey EK6 Management Application which will search and connect to your phone and display
the virtual Wiegand card number and the site/facilities code for your phone.
4.
Cut and paste the virtual Wiegand card number and site code into the Access Control System Administration screen to register a new card
and associate the access rights to it.
How do I unlock the door?
1.
Make your phone discoverable (visible to all) by consulting your phone documentation (usually in Setting -> Connectivity-> Bluetooth-> Find
Me or Setup). Videos on this for select phones are available on www.ECKey.com. We recommend creating a shortcut to managing Bluetooth
on your phone. See your phone documentation on how to do this.
2.
Every five seconds while the phone is in range ECKey will send the unique virtual Wiegand card number for that phone to the access control
system. The Administration Light will be Blue for 1 second when the message is sent.
3.
The access control system will authorise the virtual Wiegand card number and send a message to unlock the door.
Pair a phone
1)
Make your phone discoverable (
or Setup). We recommend creating a shortcut to managing Bluetooth on your phone. See your phone documentation on how to do this.
2)
Move the phone within the pairing range of the ECKey unit and wait for the phone to be prompted for the PIN provided by your installer. The
Status Light will flash blue when ECKey is registering a phone.
3)
While the status light is still flashing blue, take the phone and stand on the outside of the door with the door closed. ECKey will calibrate the
signal strength of this specific handset. Hold the phone 3 feet (1m) from the door this range will be defined as the minimum range setting for
this phone in this installation.
4)
Enter the PIN. The default PIN is 1234.
5)
Once the PIN is successfully entered, the Status Light will become solid blue for 5 seconds. Your phone is now registered with ECKey.
6)
After the successful pairing the Status Light will turn red and ECKey will return to normal operating mode.
Delete all paired phones
You will need a phone to trigger a Wiegand message. Note that in the default setting of "All Phone" no phone information is stored on ECKey and so
there is nothing to delete.
When the Wiegand message has been triggered and the Status Light is blue; press and release the Administration Button 4 times and then press
1)
the Administration Button a fifth time and hold for 3 seconds.
The Status Light will start repeated flashing blue 4 times. Release the Administration Button.
2)
ECKey is currently pending the deletion of all paired phones. You can now;
3)
a.
Confirm the deletion: press and hold the Administration Button for 3 seconds. The Status Light will turn solid blue for 5 seconds to
confirm that all phones have been the deleted. Release the Administration Button.
b.
Cancel the deletion: press and release the Administration Button.
ECKey will return to normal operating mode and the Status Light will be red.
4)

Troubleshooting

1.
Check power
2.
EK6-OC: The Status Light should flash blue when powered on. After power on the Status Light should flash once every 5 seconds.
3.
EK6-OD: The Status Light should be red when powered on.
4.
Check that your phones Bluetooth is enabled, see
5.
Check that the phone has Bluetooth set to be discoverable, see www.ECKey.com/phones.
6.
Check the wiring as per the diagrams.
7.
Access requests on the access control system event log while a phone is in range.

Register for Support

1.
You will need an internet connection, ECKey EK6 Serial Number and an email address for registration.
2.
Go to www.ECKey.com and register with the ECKey Serial Number printed on your unit in this form EK6-XX-XXXXXXX.
3.
Logon into the Support Site and select Knowledge Base-> EK6.

Frequently asked questions

Is it secure?
Yes – Each phone has a unique Bluetooth address that is converted to one of 65535 virtual 26 bit Wiegand numbers. The access rights for the virtual
Wiegand card numbers is determined by the access control system.
Can I still use my phone?
Yes - You can still use your phone as a phone (including Bluetooth Headset) at the same time as locking and unlocking the door.
Can I still use a prox card?
Yes – ECKey can be connected in parallel with an existing 26 bit Wiegand prox reader.
Can I use a PIN, change the site code, use other card formats or other settings?
The EK5 is a preconfigured unit. For variable configuration options please use the EK6. The EK6 has over 20 configuration options including restricting
access requests from registered phones, requiring a PIN to send the request, changing rights based on time of the day, Wiegand length and
others.
visible to all
) by consulting your phone documentation (usually in Setting -> Connectivity-> Bluetooth-> Find Me
www.ECKey.com/phones
Model: EK6 Install Guide
Status
Light